Canton - 11-910
Engine Oil Pan - Oval Track - Rear Sump - 5 qt - 7 in Deep - Steel - Cadmium - Ford 2300 - Each
Canton 11-910 Oil Pan Ford 2300CC Rear Sump Circle Track Pan
This Ford left turn rear sump is for ?74-97 2300cc ohc engines in Fox bodies, rear sump Pinto chassis, and mini-modifieds. It has a 7" deep, 11" wide, 8-1/2" long sump that holds 5 quarts and has a 5-1/2 quart system capacity. Pans will work with a stock starter. This pan works with our 2300 main support when using a 86C pump and pan's crank scraper is modified for clearance. This pan requires our 11-911 pickup.
- 5.5 qt System Capacity
- Works with stock starter
- Three Trap Door Baffles & Directional Oil Runners
- Crank Scraper
- Removable Windage/Anti-Slosh Baffle
- 1/2" NPT Temperature Bung
- Provision For Our Pan Mounted Dipstick
- Magnetic Drain Plug
Baffled: Yes
Gasket or Seal Included: No
Stoke: 3.126"
Recommended Accessory 4: 20-950 - Oil Pump P/U Stud for 2300 Engines
Recommended Accessory 3: 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting
Recommended Accessory 2: 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting
Recommended Accessory 1: 11-911 - 3/4" Dia. Tube Pickup for 86 C & 86 CHV Pumps
Pickup Included: No
Material: 16 Gauge Steel
Kicked Out: Yes
Hardware Included: No
Finish: Silver Plating
Capacity: 5.5 Quart System Capacity
Feature 6: Magnetic Drain Plug
Feature 5: 1/2 NPT Temp Sensor Bung
Feature 4: Provision for Canton Pan Mounted Dipstick
Feature 3: Built in Crank Scraper
Feature 2: Bolt On Windage / Anti-Slosh Baffle For Oil Control
Feature 1: Baffled with 3 Trap Doors and Directional Runners
Engine: For Ford '74-'97 2300cc ohc engines
Drain Plug Included: Yes
Dipstick Port: Yes
Crank Scraper Included: Yes
Windage Tray Included: No
