COMP Cams - 10-210-4
Camshaft - Magnum - Hydraulic Flat Tappet - Lift 0.518 / 0.518 in - Duration 292 / 292 - 110 LSA - 2500 / 6500 RPM - AMC V8 - Each
Street/strip cam for 360 and up. Use 10:1 compression with 3000+ converter and low gears. Very rough idle.
Camshaft Series: Magnum
Usage: Street/Strip
Cam Type: Hydraulic Flat Tappet
Grind Number: 292H
Basic Operating RPM Range: 2,500-6,500
Intake Duration at .050 Inch Lift: 244
Exhaust Duration at .050 inch Lift: 244
Advertised Intake Duration: 292
Advertised Exhaust Duration: 292
Lobe Separation: 110
Intake Valve Lift: 0.518
Exhaust Valve Lift: 0.518
Lifters Included: No
Valve Springs Required: Yes
Assembly Lubricant Included: Yes
Camshaft Gear Attachment: 1-Bolt
Camshaft Material: Cast Iron
Engine Family: American Motors 290-401 c.i. 8 Cylinder (1966-1991)
Cam and Lifter Kit Upgrade: CL10-210-4
K-Kit Upgrade: K10-210-4
Lifter Type: Hydraulic Flat Tappet
SK-Kit Upgrade: SK10-210-4
Amazon ASIN: B000VU0UXG
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, but must be a race/competition only vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?: No
C.A.R.B. Exemption Reason: N/A
C.A.R.B. E.O. Number: N/A
