Dinan - HB003-003
Dinan Hyper Kinetic™ HB003 Wheel 19x8.5 in. +20mm Offset - Silver
Fits 2017 & Up Tesla Model 3 - 5x114.3mm Bolt Pattern - Rear
The design of Dinan Hyper Kinetic wheels was Inspired by the styling of the wheels on the Tesla Model S Plaid prototype that Tesla took to the Nurburgring. Dinan has teamed up with legendary wheel company Halibrand to produce this iconic design. These wheels are engineered for your Tesla Model 3 or Model S with ideal offsets, staggered widths, hub centric mounting, proven fitment & tire clearance. The special offsets fill the wheel openings and move the wheels out flush with the body for optimum appearance. The Flow-Formed wheel manufacturing process applies pressure to the wheel casting while it is spinning to stretch and compress the aluminum. The finished wheel is lighter, stronger, and has a higher shock resistance & load capacity - as compared to a standard cast aluminum wheel. Individual wheels are available in 19, 20 or 21-inch diameters with silver or anthracite finish. Specific recommended combinations are listed on the individual product pages.
- Includes Dinan Center Cap - Round Factory Tesla Center Cap Can Be Re-Installed (if Desired)
- Wheels Sold Individually - Choose from 19 or 20-inch Wheel Sets for 1) Optimal Appearance & Performance; 2) Premium Appearance; 3) Range & Rotate
- Factory Tires Can be Reused on the 19x8.5 and 20x8.5 Halibrand Wheels
- Choose from 19" & 20" Diameters with 8.5" or 10" Width
- Engineered Specifically for Your Tesla Model 3 with Proven Fitment, Clearance, and Optimized Offset to Fill Up the Wheel Openings
- Unique Front & Rear Wheels with Offset Optimized for Appearance & Tire Clearance
- Staggered Width Wheels (when used with recommended tires) Tested on Rear-Wheel Drive & All-Wheel Drive Vehicles with Success - for Improved Traction & Performance without Setting Trouble Codes
- Choose from Anthracite or Silver Finish with Clear Coat for Durability & Low Maintenance
- Lighter than Factory Wheels - Approximately 2-7 lbs. Lighter Per Wheel (see weight chart for more details)
- Factory Lug Nuts, Tire Pressure Monitoring System (TPMS) Can be Reused with These Wheels
- Choose from Standard or Staggered Wheels - for Improved Traction, Handling & Appearance
- Flow Formed Wheel Manufacturing Process - Produces Wheels that are Lighter, Stronger & Have a Higher Shock Resistance (than Standard Cast Wheels)
- Hub Centric Mounting, Ensures the Wheel is Properly Centered on the Tesla Hub - Instead of Relying only on the Wheel Studs/Lug Nuts