Edelbrock - 2106
Camshaft / Lifters - Performer-Plus - Hydraulic Flat Tappet - Lift 0.460 / 0.480 in - Duration 194 / 204 - 110 LSA - Big Block Ford - Kit
Edelbrock Performer-Plus Camshaft #2106 is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2106 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold #2105 and stock cylinder heads. Will not work in 427 side-oilers. Camshaft specifications: - Intake duration: 194 Degrees - Exhaust duration: 204 Degrees - Intake lift: .460" - Exhaust lift: .480" - Lobe separation: 110 Degree - Intake Center Line: 105 Degree - Vacuum: 16"
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take the Guesswork Out of Camshaft Selection!
