Name: Edelbrock 60579 - Single Perf Pontiac 87cc Head Comp
Brand: Edelbrock
SKU: EDEL-60579
Price: 1105.43 USD
Availability: InStock

Edelbrock 60579 - Single Perf Pontiac 87cc Head Comp

MSRP: $1,215.97

$1,105.43

( saved $110.54 )

Write a Review

Product Description
Fitment

Edelbrock - 60579

Cylinder Head - Performer - Assembled - 2.110 / 1.660 in Valve - 215 cc Intake - 87 cc Chamber - 1.460 in Springs - Aluminum - Pontiac V8 - Each

The Edelbrock #60579 Performer cylinder heads are designed for outstanding performance gains in 1962-79 389-455 c.i.d. Pontiac engines. The Edelbrock #60579 Performer cylinder heads are 50-state emissions legal for 1965-79 vehicles.

The Small-block Chevy cylinder head is designed for 1987-95 Throttle Body Injected (T.B.I.) and Tuned Port Injected (T.P.I.) 5.7L S/B Chevy engines originally equipped with centerbolt valve covers. Performer centerbolt cylinder heads are 50-state street legal and accept factory centerbolt valve covers. The intake bolt pattern utilizes the 1987-95, 73° angle on the two center bolts. Will maintain stock compression ratio when used with the recommended head gasket. The Corvette centerbolt cylinder head is designed for 1986-91 Tuned Port Injected (T.P.I) 5.7L small-block Chevy Corvette engines originally equipped with centerbolt valve covers. Performer centerbolt cylinder heads are 50-state street legal and accept factory centerbolt valve covers. The intake bolt pattern utilizes the 1986-91 (straight) 90° angle on all bolts. Spark plugs are angled like stock O.E. heads. INSTALLATION NOTE: Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Edelbrock pushrods #9632 are recommended. Requires hardened pushrods. Pedestal mount rockers. When using hot air choke Q-Jet carbs, choke kit #1932 is required. Intended for use on small-bore (3.736" - 4.00") 265, 283, 305 & 307 engines. Deck thickness: 9/16", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate).

For Professional Cylinder Head Porter
Hand-Blended Intake and Exhaust Bowls
As-Cast Casting Has Small Ports And Chambers
Max Valve Size is 2.11 Int. and 1.66 Exh.
14-Degree Valve Angle
Enough Wall Thickness For CNC Machining
Seats and Manganese-Bronze Guides Included

Combustion Chamber Volume: 87

Guide Plates Included: Yes

Exhaust Runner Volume: 175

Material: Aluminum

Horsepower: 400-500

Construction Type: Complete

Rocker Arm Stud Diameter: 0.4375

Head Casting Number: N/A

Guide Material: Manganese Bronze

RGL: WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Push Rod Diameter: (Suggested) 0.3125

Exhaust Valve Diameter: 1.66

Valve Springs Included: Yes

Grade Type: Performance

Valve Spring Maximum Lift: 0.575

Camshaft Type: Flat Tappet

Valve Angle: 14

Quantity: Sold Individually

Retainer Included: Yes

Valve Included: Yes

Valve Spring Diameter: 1.46

Guide Plate Material: Hardened Steel