Edelbrock - 7106
Camshaft / Lifters - Performer RPM - Hydraulic Flat Tappet - Lift 0.572 / 0.572 in - Duration 236 / 236 - 108 LSA - Ford FE-Series - Kit
Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 236 degrees - Duration @ .050 Exhaust: 236 degrees - Lift @ Valve Intake: .572" - Lift @ Valve Exhaust: .572" - Lobe Separation: 108 Degrees - Intake Centerline: 103 Degrees - Idle Vacuum @ 1000 RPM's: 11"
- Designed for 1500 to 6500 RPM Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 To 12 in. Of Manifold Vacuum At Idle
- More Lift And Duration Than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno-Matched/Street-Proven Performance
- Take the Guesswork Out of Camshaft Selection!
