Flowmaster - 817746
Exhaust System - American Thunder - Axle-Back - 3 in Tailpipe - 4 in Tips - Stainless - Polished / Natural - GM GenV LT-Series - Chevy Camaro 2016-24 - Kit
American Thunder Axle Back Exhaust System; Dual; Dual Out Rear Exit; Incl. 3 in. Tubing/40 Series™ Delta Flow Outlaw/4 in. Logo Embossed Stainless Tip; 409 Stainless Steel;
The Flowmaster® American Thunder® Axle-back system for the 2016-2024 Camaro SS & ZL1 with the 6.2L engine, is perfect for the person looking for a powerful and very aggressive sound quality in Track mode, while maintaining a deep mellow tone for everyday driving. This kit features tandem 40 Delta Flow™ Series mufflers for daily driving, along with a pair of our race-proven Outlaw® mufflers that actually increase the open exhaust sound when in Track mode. The system is finished off with large quad 4.00-inch polished stainless steel tips replicating the factory quad NPP exhaust look. Includes functional exhaust valves to work with the O.E. actuator motors to select between sound levels. The exhaust system is full stainless steel and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit on both coupe top and convertible models with the factory NPP option (identified by quad tips.) The system includes all necessary parts and hardware for installation. Note: Be sure to check out our Scavenger Series® X-pipes, #81083 for 6-spd manual and #81084 for automatics with factory MDS valves, both designed to replace the factory mid-pipe and the flattened section of the factory tubing.
- Mandrel Bent 16ga 409 Stainless Tubing
- Limited Lifetime Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Incl. Hangers and Hardware For Easy Installation
- Axle Back System
- Dual Rear Exit
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
Catalytic Converter Included: No
Exhaust Series: American Thunder
Exhaust Type: Dual
Exit Position: Dual Out Rear
Exit Style: Straight
Heat Shield Attached: No
Inlet Inside Diameter: 3.000 in.
Material: 409 Stainless Steel
Mount Type: Uses Factory Hangers
Muffler Body Material: 409S Stainless Steel
Muffler Body Shape: Oval
Muffler Count: 2
Muffler Finish: Black
Muffler Inlet Diameter: 3.000 in.
Muffler Outlet Diameter: 3.000 in.
Muffler Part Number: Kit Only
Muffler Series: 40 Series Delta Flow Outlaw
Muffler Type: Welded Baffle
Outlet Outside Diameter: 3.000 in.
Single or Dual: Dual
Sound Level: Aggressive
System Type: Axle Back
Tail Pipe Diameter: 3.000 in.
Tip Cut: Angle
Tip Diameter: 4.000 in.
Tip Edge Style: Cut
Tip Finish: Polished
Tip Length: 5.250 in.
Tip Logo: Embossed
Tip Material: 304 Stainless Steel
Tip Quantity: 4
Tip Shape: Round
Tip Type: Double Wall
Tubing Diameter: 3.000 in.
Tubing Material: 409S Stainless Steel
[{"BaseVehicleId":137049,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":138443,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":138443,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":143231,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":143231,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":146480,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":146480,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":148807,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":148807,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":152818,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":152818,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":156564,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":156564,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":152818,"SubModelId":5642,"EngineBaseId":5920},{"BaseVehicleId":156564,"SubModelId":5642,"EngineBaseId":5920},{"BaseVehicleId":161467,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":161467,"SubModelId":5642,"EngineBaseId":5920},{"BaseVehicleId":161467,"SubModelId":492,"EngineBaseId":5920},{"BaseVehicleId":169472,"SubModelId":3069,"EngineBaseId":5920},{"BaseVehicleId":169472,"SubModelId":5642,"EngineBaseId":5920},{"BaseVehicleId":169472,"SubModelId":492,"EngineBaseId":5920}]
