Mishimoto - MMICP-FOST-13HP
Ford Focus ST Hot-Side Intercooler Pipe, 2013-2018 Polished
Mishimoto Ford Focus ST Hot-Side Intercooler Pipe PreSale MMICP-FOST-13HP
Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14-percent increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto's Lifetime Warranty.
- Direct fit for the 2013-2018 Ford Focus ST
- 26-percent greater flow than stock hot-side pipe
- 14-percent increase in volume over stock hot-side pipe
- 2.5in Mandrel-bent aluminum piping
- Mishimoto Lifetime Warranty
TechSpec Applications: Ford Focus ST, 2013-2018
TechSpec Engine Codes: N/A
TechSpec Chassis Codes: N/A
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Core Type: N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Height (in): N/A
TechSpec Inlet (in): 2
TechSpec Outlet (in): 2.5
TechSpec Weight (lbs): N/A
TechSpec Note: N/A
TechSpec Includes: (1) Aluminum Intercooler Pipe--(2) Silicone Couplers--(4) High-Torque Worm Gear Clamps--Mishimoto Lifetime Warranty
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Pipe Shape: N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Centerline Radius: N/A
SellingPoint01: Direct fit for the 2013-2018 Ford Focus ST
SellingPoint02: 26-percent greater flow than stock hot-side pipe
SellingPoint03: 14-percent increase in volume over stock hot-side pipe
SellingPoint04: 2.5-in Mandrel-bent aluminum piping
SellingPoint05: Includes Mishimoto silicone couplers and Mishimoto high-torque worm gear clamps
SellingPoint06: Available in polished or wrinkle black powder-coating
SellingPoint07: Mishimoto Lifetime Warranty
SellingPoint08: N/A
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
CARB EO Number: D-759-6
Install Difficulty: 3
OptionLabel: Polished
[{"VehicleId":193618},{"VehicleId":207014},{"VehicleId":214300},{"VehicleId":229422},{"VehicleId":242285},{"VehicleId":248465},{"BaseVehicleId":136921,"SubModelId":973},{"BaseVehicleId":141223,"SubModelId":973},{"BaseVehicleId":143567,"SubModelId":973},{"BaseVehicleId":119723,"SubModelId":973},{"BaseVehicleId":127938,"SubModelId":973},{"BaseVehicleId":131027,"SubModelId":973}]
