MSD - 8159
Crank Trigger Pickup - Non-Magnetic - 3/8-24 in Thread - 1.50 in Long - 36 in Long Shielded Harness - Kit
Non-Magnetic Pickup Assembly; 3/8 in. x 24 x 1.5 in.; Non-Shielded 36 in.;
MSD's non-magnetic pick-ups are engineered for extreme applications. In fact, this pick-up was designed and tested on 300+ mph top fuel dragsters. To live up to MSD's demanding expectations in these extreme applications, we took it upon ourselves to design and build the pick-ups in-house. This way we can control every aspect of their assembly and quality. Each pick-up is hand wound on a special bobbin and terminated to our tinned conductor, Teflon jacketed wiring. These wires are also routed through a strain relief for protection. This assembly is then installed into the precision housing and is potted with a fracture resistant epoxy compound. To ensure that the windings are entirely encased in epoxy, the pick-ups undergo a vacuum procedure to remove any air inside the housing. All of these procedures are necessary to produce the strongest, most reliable non-magnetic pick-up available.
- Designed And Built In-House 3/8 x 24 x 1.5
- Completely Potted
- Strain Relief
- Proprietary Bobbin And Winding Design
- For Use w/MSD Flying Magnet Crank
