MSD - 8987
Timing Controller - Start and Step Retard Control - Stage Retard 1-15 Degrees - Each
If you run locked-out timing on your street/strip car and the engine cranks slowly due to advanced timing or high compression, the new MSD Start and Step Retard Control is what you need!
This digitally controlled accessory allows you to select a 5 Degree, 10 Degree, 15 Degree or 20 Degree of retard while the engine is cranking. By pulling the timing back during cranking the pressure being applied to the starter, flywheel and the rotating assembly of the engine is lessened so the engine will start easier. Once the engine starts or when the key is released the timing returns to the set mechanical amount. The Start and Step also features a single stage of retard making it ideal for nitrous engines. This retard can easily be activated when the nitrous is turned on, or add a switch for a high speed retard. You can simply dial in 1 Degree-15 Degree with the rotary dial for quick adjustments. The Start and Step will easily connect to magnetic pickups and has a points input as well, plus it can work on 4, 6 or 8-cylinder engines.
- Compatible w/4/6 Or 8 Cyl. Engines
- Accepts Points/Amplifiers/Mag Pickup Trigger Signals
